Complete Product Line

GS Polymers offers a wide product line. Below is a list of our standard products.

Product link to PDF

Description Cure System Gel Time Cure Conditions Hardness, Shore MSDS link to PDF
GSP 1329 Two Part, 2:1 general purpose potting compound and adhesive, good impact strength and excellent adhesion to a variety of substrates Epoxy 60-90 minutes 24 hours at room temperature 72 D get msds
GSP 1331-1 Two Part, 1:1, pottting system provides low stress on internal components, long open time, economical and easy to handle Epoxy 4 hours 30 minutes at 220°F (104°C,) or 24 hours at room temperature 89 D get msds
GSP 1337-1 Two Part, 2:1, excellent adhesion and through-cure to damp concrete and other substrates.  Cures in wet and cold conditions, good impact strength Epoxy 60-75 minutes 24 hours at room temperature 75 - 80 D get msds
GSP 1339-1 Two Part, 4:1 adhesive provides thermal conductivity, low viscosity, chemical and thermal resistance Epoxy

45-65 minutes

 24 hours at room temperature 85 D get msds
GSP 1345 Two Part, 1:1,thermally conductive potting compound, excellent adhesion and impact resistance, available in cartridges Epoxy 60 minutes 2 hours at 120°F (50°C,) or 24 hours at room temperature 80 - 85 D get msds
GSP 1353 Two Part, 1:1 General Purpose adhesive which is flowable and fast curing Epoxy 3-5 minutes 20 minutes at room temperature 70 D+ get msds
GSP 1354 Two Part, 1:1, General Purpose adhesive which is thixotropic and fast curing Epoxy 4 minutes 10 minutes at room temperature 70 D+ get msds
GSP 1360-2 Two Part Economical Casting System Epoxy 90 minutes 24 hours at room temperature 87 D get msds
GSP 1414
Two part, 1:4, temperatures up to 230°F, good hydrolytic stability, FDA
Polyurethane and Epoxy Hybrid 2 hours 6-24 hours at room temperature

50-55 A

GSP 1524-2 Two Part, 1:2, adhesive that can be used in applications requiring FDA  Polyurethane 45 minutes 24 hours at room temperature   get msds
GSP 1526-1 Two Part, 1:1, adhesive, excellent choice for a filter seal Polyurethane 30-60 minutes 24 hours at room temperature 70 A get msds
GSP 1534-11 Two Part, 1:1, flowable A & B parts immediately form a thixotropic bead with a fast cure, 3 minute set up, excellent adhesion, shock absorbent Polyurethane 2-3 minutes

1 hour at room temperature

45 D get msds
GSP 1534-3 Two Part, 1:1, flowable adhesive provides fast cure, 6 minute set up, remains flexible after cure Polyurethane 6 minutes 1 hour at room temperature 92 A, 43 D get msds
GSP 1539-4 Two Part, 1:2, electrical potting compound, fast cure, provides superior adhesion to vinyl, ideal for small volume potting applications Polyurethane 3 minutes 1-3 hours at room temperature 60 A get msds
GSP 1552-2 Two Part, 1:1, Optically Clear Soft, water and UV Resistant Click to see example Polyurethane 30 minutes 2 hours at 180°F (82°C,) or 24-48 hours at room temperature 60 A get msds
GSP 1555 Two Part, 2:1 Optically Clear Hard Click to see example Polyurethane 10-15 minutes 2 hours at 180°F (82°C,) or 24-48 hours at room temperature 75 D get msds
GSP 1573-1 Two Part, 1:2 Cost effective, general purpose potting system Polyurethane 15 minutes 24 hours at room temperature 60 A get msds
GSP 1586-2 Two Part, 2:1, Impact Resistant, Fast Cure Casting System Polyurethane 2-3 minutes 24 hours at room temperature 70 D get msds
GSP 1595-2 Two Part, Excellent impact resistance, heat cure Polyurethane 15-30 minutes Warm Part B, mix with Part A, once gelled, part must be post cured at 250°F for 16 hours 40 D get msds
GSP 1603-3 Two Part, Potting compound provides 1-2 hours of working time, ideal for hand mixed applications, water resistant, excellent adhesion Polyurethane 2 hours 24 hours at room temperature 85 A get msds
GSP 1603-5 Two Part, Electrical potting compound, gels quickly, water resistant, excellent adhesive Polyurethane 30 minutes 24 hours at room temperature 70 A get msds
GSP 1650 Two Part, 1:4, oil resistant adhesive/sealant, works well as crack filler Polyurethane 15 minutes 1 hour at room temperature 60 A get msds
GSP 1710 Two Part, 4:1 excellent adhesive with impact resistance, paste-like consistency Epoxy 20-30 minutes 20 minutes at 250°F (121°C,) or 2-3 hours at room temperature 90 D get msds
GSP 1711 Two Part, 4:1 adhesive with good chemical and temperature resistance, flowable Epoxy 20-30 minutes 20 minutes at 250°F (121°C,) or 2-3 hours at room temperature 90 D get msds
GSP 1790 Two Part, 4:1 adhesive, features extreme impact resistance, and excellent chemical and heat resistance. Epoxy 20-30 minutes 20 minutes at 250°F (121°C,) or 2-3 hours at room temperature 90 D get msds
GSP 4030 Two Part, Casting resin, pourable, high strength and flexibility, 40 Shore A Polyurethane 15 minutes 1 hour at 150°F, or 24 hours at room temperature 40 A get msds
GSP 5550-2 Two Part, 1:1 Quck Cure, high tear strength, low viscosity, 55 Shore A Polyurethane 15 - 30 minutes 20 minutes at 150°F (65°C,) or overnight at room temperature 55 A get msds
GSP 6040 Two Part, Casting resin, pourable, high strength and flexibility, 60 Shore A Polyurethane 2 hours 1 hour at 150°F, or 24 hours at room temperature 60 A get msds
GSP 8065 Two Part, Casting resin, pourable, high strength and flexibility, 80 Shore A Polyurethane 2 hours 1 hour at 150°F, or 24 hours at room temperature 80 A get msds
GSP 9020 Two Part, Casting resin, pourable, excellent memory, low compression set, 90 Shore A Polyurethane 1-2 hours 1 hour at 150°F, or 24 hours at room temperature 90 A get msds
GSP AD204-3 One Part, flowable adhesive. Excellent adhesion, Moisture cure at room temp. Polyurethane   Overnight at room temperature   get msds
GSP EP 200 One Part, thixotropic adhesive. Excellent chemical resistance and adhesion in hot environments. Heat cure. Epoxy   20 minutes @ 260°F (125°C)   get msds

Don't see what you need? We can make it! -->> Custom Formulating