GS Polymers, Epoxy; Adhesive, Potting Compounds, Casting Resins

Epoxy Products

Epoxy Adhesives

Product link to PDF Description Cure System Ratio by Volume Gel Time Cure Conditions Hardness, Shore MSDS link to PDF

GSP 1329 General purpose adhesive, good impact strength and excellent adhesion to a variety of substrates Epoxy 2A:1B 60-90 minutes 24 hours at room temperature 72 D get msds

GSP 1337-1 Excellent adhesion and through-cure to damp concrete and other substrates. Cures in wet and cold conditions, good impact strength Epoxy 2A:1B 60-75 minutes 24 hours at room temperature 75-80 D get msds

GSP 1339-1 Provides low viscosity, chemical and thermal resistance Epoxy 4A:1B 45 - 65 minutes 24 hours at room temperature 85 D get msds

GSP 1353 General Purpose adhesive which is flowable and fast curing Epoxy 1A:1B 3-5 minutes 20 minutes at room temperature 70 D+ get msds

GSP 1354 General Purpose adhesive which is thixotropic and fast curing Epoxy 1A:1B 4 minutes 20 minutes at room temperature 70 D+ get msds

GSP 1710 Excellent adhesive with impact resistance, paste-like consistency Epoxy 4A:1B 20-30 minutes 20 minutes at 250°F (121°C,) or 2-3 hours at room temperature 90 D get msds

GSP 1711 Flowable adhesive with good chemical and temperature resistance Epoxy 4A:1B 20-30 minutes 20 minutes at 250°F (121°C,) or 2-3 hours at room temperature 90 D get msds

GSP 1790 Extreme impact resistance, excellent chemical and heat resistance. Epoxy 4A:1B 20-30 minutes 20 minutes at 250°F (121°C,) or 2-3 hours at room temperature 90 D get msds

GSP EP 200 One Part, Excellent chemical resistance and adhesion in hot environments. Heat cure Epoxy One Part 20 minutes @ 260°F (125°C) get msds

Top of Page

Product link to PDF	Description	Cure System	Ratio by Volume	Gel Time	Cure Conditions	Hardness, Shore	MSDS link to PDF
GSP 1329	General purpose adhesive, good impact strength and excellent adhesion to a variety of substrates	Epoxy	2A:1B	60-90 minutes	24 hours at room temperature	72 D	get msds
GSP 1337-1	Excellent adhesion and through-cure to damp concrete and other substrates. Cures in wet and cold conditions, good impact strength	Epoxy	2A:1B	60-75 minutes	24 hours at room temperature	75-80 D	get msds
GSP 1339-1	Provides low viscosity, chemical and thermal resistance	Epoxy	4A:1B	45 - 65 minutes	24 hours at room temperature	85 D	get msds
GSP 1353	General Purpose adhesive which is flowable and fast curing	Epoxy	1A:1B	3-5 minutes	20 minutes at room temperature	70 D+	get msds
GSP 1354	General Purpose adhesive which is thixotropic and fast curing	Epoxy	1A:1B	4 minutes	20 minutes at room temperature	70 D+	get msds
GSP 1710	Excellent adhesive with impact resistance, paste-like consistency	Epoxy	4A:1B	20-30 minutes	20 minutes at 250°F (121°C,) or 2-3 hours at room temperature	90 D	get msds
GSP 1711	Flowable adhesive with good chemical and temperature resistance	Epoxy	4A:1B	20-30 minutes	20 minutes at 250°F (121°C,) or 2-3 hours at room temperature	90 D	get msds
GSP 1790	Extreme impact resistance, excellent chemical and heat resistance.	Epoxy	4A:1B	20-30 minutes	20 minutes at 250°F (121°C,) or 2-3 hours at room temperature	90 D	get msds
GSP EP 200	One Part, Excellent chemical resistance and adhesion in hot environments. Heat cure	Epoxy	One Part		20 minutes @ 260°F (125°C)		get msds

Epoxy Potting and Encapsulating Compounds

Product link to PDF Description Cure System Ratio by Volume Gel Time Cure Conditions Hardness, Shore MSDS link to PDF

GSP 1331-1 Low stress on internal components allows for increased part size, long open time, economical and easy to handle Epoxy 1A:1B 4 hours 30 minutes at 220°F (104°C,) or 24 hours at room temperature 89 D get msds

GSP 1345 Thermally conductive excellent adhesion and impact resistance, available in cartridges Epoxy 1A:1B 60 minutes 2 hours at 120°F (50°C,) or 24 hours at room temperature 80 - 85 D get msds

Top of Page

Product link to PDF	Description	Cure System	Ratio by Volume	Gel Time	Cure Conditions	Hardness, Shore	MSDS link to PDF
GSP 1331-1	Low stress on internal components allows for increased part size, long open time, economical and easy to handle	Epoxy	1A:1B	4 hours	30 minutes at 220°F (104°C,) or 24 hours at room temperature	89 D	get msds
GSP 1345	Thermally conductive excellent adhesion and impact resistance, available in cartridges	Epoxy	1A:1B	60 minutes	2 hours at 120°F (50°C,) or 24 hours at room temperature	80 - 85 D	get msds

Epoxy Casting Systems

Product link to PDF Description Cure System Ratio by Weight Gel Time Cure Conditions Hardness, Shore MSDS link to PDF

GSP 1360-2 Two Part Economical Casting System Epoxy 100A:16B 90 minutes 24 hours at room temperature 87 D get msds

Top of Page

Product link to PDF	Description	Cure System	Ratio by Weight	Gel Time	Cure Conditions	Hardness, Shore	MSDS link to PDF
GSP 1360-2	Two Part Economical Casting System	Epoxy	100A:16B	90 minutes	24 hours at room temperature	87 D	get msds

Advantages of Epoxies

Epoxy formulated products offer many advantages, including:

increased temperature capabilities

increased chemical resistance

higher hardnesses

outstanding adhesion

great versatility

room temperature or heat cure

pigmentable

When epoxies are filled the capabilities can be expanded to include:

Flame retardancy

Thermal conductivity

Electrical conductivity

Top of Page

Technical Information

The term epoxy is defined a ring with an oxygen atom bonded to two carbon atoms where the carbon atoms are already linked together. For example:

An epoxy resin contains such a structure and is capable of being converted into a thermoset form, i.e. the liquid form of the epoxy resin cures (thermosets.)

Epoxy resins form tight cross-linked polymer structures characterized by toughness, strong adhesion, and low shrinkage, used especially in surface coatings and adhesives.

Top of Page