GS Polymers, Adhesives

Adhesives

1-Part Systems

Product link to PDF Description Cure System Thickness Cure Conditions Color MSDS link to PDF

GSP EP 200 Excellent chemical resistance and adhesion in hot environments. Heat cure Epoxy Thixotropic 20 minutes @ 260°F (125°C ) Black get msds

GSP AD204-3 Excellent adhesion, Moisture cure at room temperature. Polyurethane Flowable 24 hours at room temperature Transparent Light Yellow get msds

Product link to PDF	Description	Cure System	Thickness	Cure Conditions	Color	MSDS link to PDF
GSP EP 200	Excellent chemical resistance and adhesion in hot environments. Heat cure	Epoxy	Thixotropic	20 minutes @ 260°F (125°C )	Black	get msds
GSP AD204-3	Excellent adhesion, Moisture cure at room temperature.	Polyurethane	Flowable	24 hours at room temperature	Transparent Light Yellow	get msds

2-Part Systems

Product link to PDF Description Cure System Ratio by Volume Gel Time Cure Conditions Hardness, Shore MSDS link to PDF

GSP 1329 General Purpose Adhesive, good impact strength and excellent adhesion to a variety of substrates Epoxy 2A:1B 60-90 minutes 24 hours at room temperature 72 D get msds

GSP 1337-1 Excellent adhesion and through-cure to damp concrete and other substrates. Cures in wet and cold conditions, good impact strength Epoxy 2A:1B 60-75 minutes 24 hours at room temperature 75-80 D get msds

GSP 1339-1 Provides low viscosity, chemical and thermal resistance Epoxy 4A:1B 45 - 65 minutes 24 hours at room temperature 85 D get msds

GSP 1353 General Purpose adhesive which is flowable and fast curing Epoxy 1A:1B 3-5 minutes 20 minutes at room temperature 70 D+ get msds

GSP 1354 General Purpose adhesive which is thixotropic and fast curing Epoxy 1A:1B 4 minutes 20 minutes at room temperature 70 D+ get msds

GSP 1524-2 Good adhesive with FDA Polyurethane 1A:2B 45 minutes 24 hours at room temperature get msds

GSP 1526-1 Water resistant, excellent choice for a filter seal Polyurethane 1A:2B 30-60 minutes 24 hours at room temperature 70 A get msds

GSP 1534-11 Flowable A & B parts immediately form a thixotropic bead with a fast cure, 3 minute set up, excellent adhesion, shock absorbent Polyurethane 1A:1B 2-3 minutes 1 hour at room temperature 45 D get msds

GSP 1534-3 Flowable adhesive provides fast cure, 6 minute set up, remains flexible after cure Polyurethane 1A:1B 6 minutes 1 hour at room temperature 92 A, 43 D get msds

GSP 1555 Optically Clear Hard Click to see example Polyurethane 2A:1B 10-15 minutes 2 hours at 180°F (82°C,) or 24-48 hours at room temperature 75 D get msds

GSP 1595-2 Excellent impact resistance, heat cure Polyurethane 15-30 minutes Warm Part B, mix with Part A, once gelled, part must be post cured at 250°F for 16 hours 40 D get msds

GSP 1650 Oil resistant adhesive/sealant, works well as crack filler Polyurethane 1A:4B 15 minutes 1 hour at room temperature 60 A get msds

GSP 1710 Excellent adhesive with good impact resistance, paste-like consistency Epoxy 4A:1B 20-30 minutes 20 minutes at 250°F (121°C,) or 2-3 hours at room temperature 90 D get msds

GSP 1711 Adhesive with good chemcial and temperature resistance, flowable Epoxy 4A:1B 20-30 minutes 20 minutes at 250°F (121°C,) or 2-3 hours at room temperature 90 D get msds

GSP 1790 Excellent impact, chemical and heat resistance. Epoxy 4A:1B 20-30 minutes 20 minutes at 250°F (121°C,) or 2-3 hours at room temperature 90 D get msds

Product link to PDF	Description	Cure System	Ratio by Volume	Gel Time	Cure Conditions	Hardness, Shore	MSDS link to PDF
GSP 1329	General Purpose Adhesive, good impact strength and excellent adhesion to a variety of substrates	Epoxy	2A:1B	60-90 minutes	24 hours at room temperature	72 D	get msds
GSP 1337-1	Excellent adhesion and through-cure to damp concrete and other substrates. Cures in wet and cold conditions, good impact strength	Epoxy	2A:1B	60-75 minutes	24 hours at room temperature	75-80 D	get msds
GSP 1339-1	Provides low viscosity, chemical and thermal resistance	Epoxy	4A:1B	45 - 65 minutes	24 hours at room temperature	85 D	get msds
GSP 1353	General Purpose adhesive which is flowable and fast curing	Epoxy	1A:1B	3-5 minutes	20 minutes at room temperature	70 D+	get msds
GSP 1354	General Purpose adhesive which is thixotropic and fast curing	Epoxy	1A:1B	4 minutes	20 minutes at room temperature	70 D+	get msds
GSP 1524-2	Good adhesive with FDA	Polyurethane	1A:2B	45 minutes	24 hours at room temperature		get msds
GSP 1526-1	Water resistant, excellent choice for a filter seal	Polyurethane	1A:2B	30-60 minutes	24 hours at room temperature	70 A	get msds
GSP 1534-11	Flowable A & B parts immediately form a thixotropic bead with a fast cure, 3 minute set up, excellent adhesion, shock absorbent	Polyurethane	1A:1B	2-3 minutes	1 hour at room temperature	45 D	get msds
GSP 1534-3	Flowable adhesive provides fast cure, 6 minute set up, remains flexible after cure	Polyurethane	1A:1B	6 minutes	1 hour at room temperature	92 A, 43 D	get msds
GSP 1555	Optically Clear Hard Click to see example	Polyurethane	2A:1B	10-15 minutes	2 hours at 180°F (82°C,) or 24-48 hours at room temperature	75 D	get msds
GSP 1595-2	Excellent impact resistance, heat cure	Polyurethane		15-30 minutes	Warm Part B, mix with Part A, once gelled, part must be post cured at 250°F for 16 hours	40 D	get msds
GSP 1650	Oil resistant adhesive/sealant, works well as crack filler	Polyurethane	1A:4B	15 minutes	1 hour at room temperature	60 A	get msds
GSP 1710	Excellent adhesive with good impact resistance, paste-like consistency	Epoxy	4A:1B	20-30 minutes	20 minutes at 250°F (121°C,) or 2-3 hours at room temperature	90 D	get msds
GSP 1711	Adhesive with good chemcial and temperature resistance, flowable	Epoxy	4A:1B	20-30 minutes	20 minutes at 250°F (121°C,) or 2-3 hours at room temperature	90 D	get msds
GSP 1790	Excellent impact, chemical and heat resistance.	Epoxy	4A:1B	20-30 minutes	20 minutes at 250°F (121°C,) or 2-3 hours at room temperature	90 D	get msds

Custom Adhesives

Don't see what you need? We can make it! -->> Custom Adhesive Formulating